For a very similar fireplace we have the Furrion part # FF34SW15ABL which is 33-7/8 inches wide, 17-3/4 inches tall and 6-1/4 inches deep. The wall cut out dimensions are 30-9/16" wide x 16-1/4" tall x 5" deep. view full answer...
The Roadmaster Front Anti-Sway Bar # RM-1139-148 uses a 1/2-13 x 2” grade 8 bolt for the front brackets. I have in the past ran into this issue before but it's not very common so I would just run to your local hardware store and get some 1/2-13 x 3" grade 8 bolts to complete the installation. view full answer...
Yes, the Replacement Fan Motor Assembly Kit # FVK8017-00 is the correct replacement fan blade with motor for your vent fan XW8000WD3WH. view full answer...
Yes, you can use a 2-inch hitch extender when using the Swagman E-Spec # S94FR. The shortest 2-inch extender we carry is the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06. Added with the shank length of the E-Spec, it will give you a total length of 17-1/2 inches from the center of the hitch pinhole to the closest part of the rack (when folded up).
It is important to note that using a hitch extender will reduce the maximum weight capacity of your trailer hitch by 50%. view full answer...
The correct steering stabilizer for your 2013 Winnebago Vista 27N motorhome is the following:
- Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK22-RSSA
I have added a link to a video showing this being installed on a Winnebago Vista for you to check out as well.
Additionally, if you find that you still need additional support to control sway on your motorhome, I highly recommend the Roadmaster Rear Anti-Sway Bar # RM-1139-146, and then the... view full answer...
For your 2014 Winnebago Vista Motorhome the Roadmaster Reflex Steering Stabilizer you need is the # RM-RBK22-RSSA which is a confirmed fit.
I attached an install video for this on a similar Winnebago Vista for you to check out as well. view full answer...
Yes, when picking out a rear sway bar for a motorhome like your 2008 Winnebago Vista 30B it is important you match the GVWR of the MH to the sway bar. The # RM-1139-146 is the correct fit and would be what you need. If you go with a higher rated sway bar it will give you a harsher ride quality than you'd want so it's not recommended. view full answer...
The Solera 18V Power RV Awning - 16' Wide # LC729486 that you are looking at will work great on your 2008 Winnebago Vista 30B as it does not come with install brackets and hardware. It basically will bolt right in place of what you have. view full answer...
The Motor Upgrade Kit for Kwikee Electric RV Steps part # LC379145 is a very popular upgrade kit which works with most Kwikee Steps. In order to confirm this is correct you'll need to look for the series number of your steps which should be on a tag somewhere on the step assembly. If the series number is 22, 23, 28A, 30, 32, 33, 34, 35, 36, 38, or 40 then the kit will work. view full answer...
For your 2014 Winnebago Vista Motorhome, I recommend the Adco RV Cover for Winnebago Class A Motorhome (Up to 28' Long) part # 290-52203.
The Adco RV Cover is an excellent option for you. It protects from rain, dirt, wind, and sun meaning it is suitable for pretty much all climates. The contoured-fit will conform to the shape of you motorhome and the zippered panels offer easy access. The cover also has built-in vents to prevent moisture buildup and weighted straps to prevent any bellowing... view full answer...
There unfortunately isn't a guide to tell us the size of the jack feet on your 2017 Winnebago Vista 29VE so you would have to measure the feet and take note of their shape. You'll want to measure each foot because some leveling systems will use different size feet in the front compared to the back.
The SnapPad XTRA Jack Pads for Lippert Leveling Systems # SP54FR4 you were looking at has four 9" round compatible pads. If you find your size or shapes vary then let me know and I can find... view full answer...
The optional LED you see in the install diagrams for the Redarc BCDC Charger part # 331-BCDC1240D is just an indicator light to let you know it's charging. It does not show anything beyond it being off or on. view full answer...
The Jensen Stereo -AM/FM - CD/DVD - USB - Bluetooth # JWM60A is a great replacement for your Jensen AWM970. There is not a wiring harness to match your old harness to the new one, but I have attached the photo from each harness to help you with mating functions so it will be easy to swap out. view full answer...
Great choices as both the rear anti-sway bar and steering stabilizer are going to make a huge difference in how your 2021 Winnebago Vista 29VE handles. The correct parts for your motorhome are as follows:
- Roadmaster Rear Anti-Sway Bar # RM25VR
- Roadmaster Exact Center Steering Stabilizer # RM63RR view full answer...
The LF error on your Lippert Ground Control # LC358590 shows that there is an issue with the left front jack. Try manually extending that jack. Next extend all the jacks at least 6 inches an then press and hold the retract button until the jacks begin retracting. All of the jacks should fully retract and clear the error code. You should be able to auto level after that.
If your left front jack won't manually extend or retract, check that jack's wiring and the fuse located at the control... view full answer...
I have a solution for you, but Winnebago and other RV/Trailer manufacturers are quite secretive about the specs on their OEM replacement parts, so unfortunately I'm not able to determine anything from the part number provided. Most RVs have a standard vent opening of 14-1/4" x 14-1/4" (with vent covers being 14"x14")- so replacement vent covers are fairly universal once you've determined that you have that sized opening.
In order to determine the correct roof vent, measure where the vent... view full answer...
The easiest way to determine whether a Class A motorhome has air or hydraulic brakes is by whether the motorhome runs on diesel or gas. For the most part, diesel Class A's have air brakes. From my research the Vista has a gas engine and therefore has hydraulic brakes. The SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 is an excellent choice because once installed you can drive the towed vehicle without the need to remove the braking system as is the case with the portable systems... view full answer...
What you have are 3 different types of curtain mounting options.
Part # 37281365 is sewn to the curtain and the plastic piece connects to a curtain track.
Part # 37281255 is sewn to the curtain and the plastic piece connects to a curtain track.
Part # 37281155 has the hook end that connects to a curtain and then the white pieces attach to a track.
I have attached some review videos and photos to help show this. Basically you need to already have certain curtain tracks to use the various... view full answer...
If you can get me the axle capacity of your trailer and the current lengths of your leaf springs I can determine which of our leaf springs would be the best choice. I was unable to locate that info. We have Timbren kits that are designed for adding additional suspension support like the part # TTRA1032 which can provide up to 7,000 lbs of additional support. view full answer...
For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part # S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per bike, and also has a frame clamp design that's compatible with your step thru frame and fender. I attached a review video for more info as well. view full answer...
Go To Results